£191.00£250.00 Inc V.A.T


Main Features


Static IP or DHCP network addressing.

Supported operating systems: Any with Ethernet networking support. Windows, MAC OS, Linux, iOS, Android….

Fully compatible with USB DMX software suitable for ENTTEC USB Pro. Drivers for Windows, OS X, Linux.

eDMX2 PRO – 2x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support

Merge 2 incoming Art-Net streams per output channel with both HTP and LTP options

Merge Art-Net + DMX input -> DMX output

Merge 1x DMX input + USB DMX source -> DMX output

1500V Isolation between every port

Tough metal enclosure.

Available with 3 pin or 5 pin XLR socket, no adapter purchase required.

Power over Ethernet 802.3af compliant

External 5Vdc power input USB type B socket. Can be powered from computer USB port.

etherCON for network connection.

Fully compatible with *ALL* software and hardware that supports Art-Net I, II, 3 & 4 and sACN protocols.
Works with your existing console if Art-Net or sACN external nodes are supported.

Configuration utility with basic Art-Net output/input test functionality.

Firmware updates can be performed by end user.





Perfect middle ground when you need more than 1 universe but without the expense and bulk of 4 universe nodes. We’ve incorporated both Art-Net/sACN and USB DMX in the same unit along with Power over Ethernet making this the most flexible 2 universe node around. Built tough and compact the eDMX2 PRO takes little space in your bag and can be USB or PoE powered. Mount an eDMX2 PRO closer to the rig and run Ethernet cable back to the controller using PoE power.


With USB DMX and ArtNet/sACN capabilities the eDMX2 PRO gives you the best of both worlds. Run USB DMX from your laptop or PoE Ethernet ArtNet as part of a larger rig or even merge USB DMX from another lighting application with your main system. eDMX2 PRO is the most flexible interface on the market.


Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the eDMX2 PRO is the perfect choice for temporary small to medium rigs. DMX merge functionality works from both Art-Net/sACN, DMX Input and USB DMX sources providing plenty of configuration possibilities. Designed and manufactured in New Zealand to the highest standards.

Additional information

DMX Pins

3 Pin, 5 Pin

Power Over Eithernet Injector Required

With P-O-E Supply, Without P-O-E Supply